Product Description - Chauvet 4 Play Schnellanleitung

EN
Product
Description
Product Overview
AC Power
Power Linking
Fuse Replacement
Mounting
Mounting
Diagram
The 4 Play™ is a mobile effect light that projects RGBW beams around the
room with no moving heads. Mount the 4 Play™ to a truss to save floor
space, and position each each separately for maximum effect coverage.
Power linking saves time and cables, DMX linking allows master/slave
operation with each, and sound-active auto programs make immediate use a
breeze.
DMX In
DMX Out
Sound adjustment knob
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 30 4 Play™ products at 120 VAC and 46 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Tripod
attachment knob
Control panel
Safety
Mounting clamps
Clamp connection
3
4 Play™ QRG
Fuse holder
Power Out
Power In
Back Panel View
Notes.
Clamp connection
Tripod
mounting point