Kubota G23 Montageanleitung Seite 24

22
BASSEMBLE THE JOINT, LIFT ARM
1. Place the joint collar (5) into each end of the upper and
lower lift arms.
2. Place eight flange bolts (3) into four lift arm stays (2).
3. Place the lift arm joint (1) to both lower lift arms.
Place the lift arm stay (2) with flange bolts (3) into the
lower lift arms and the lift arm joint (1). And tighten four
bolts (3) with four flange nuts (4) as shown in the
figure.
4. Place the lift arm stay (2) into both upper lift arms.
5. Place the lift arm joint (1) to the upper lift arm and
secure them with four flange bolts (3) and four nuts (4).