Before The First Use - TriStar FR-6927 Bedienungsanleitung

beFoRe the FIRSt uSe

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Slide the heating elements (No. 4) correctly in the recess of the outer
shell (No. 8). If the heating elements are not properly attached, the unit
will not switch on for security reasons.
• This type of fryer is only suitable for use with oil or liquid fat, and not
for solid fat. Using solid fat entails the risk of trapping water in the fat
which will cause it to spatter violently when heated up. Also ensure that
the oil / fat is not contaminated with water, for example from frozen
products, this will cause excessive spattering.
• Never use the fryer without oil or fat as this will damage the appliance.
Never pour any liquid, such as water, in the pan.
uSe
• Wash the baskets (No. 3), the lids (No.1) and the oil bowls (No. 5)
in warm water. Dry them well before use. Ensure that all electrical parts
remain completely dry.
• Fill the appliance with the required amount of oil or fat. Ensure that
the appliance is filled at least to the minimum level and not higher than
the maximum level, as indicated on the inside of the fryer.
• For optimal results we advice to avoid mixing different types of oil.
• Select the temperature with the temperature button (No. 5) on the
control panel for the food you wish to fry.
• Put the plug of the device into the outlet. The green control light (No. 6)
will turn on as soon as the desired temperature has been reached.
• Use the handle (no. 2) to lift the basket from the fryer. Place the food to
be fried in the basket. For the best results the food should be dry before
being placed in the basket. Immerse the basket into the oil or fat slowly
to prevent the oil from bubbling up too strongly.
• To ensure the oil stays at the correct temperature, the thermostat will
switch on and off. The green control light (No. 6) will also go on and off.
• Lift the basket when the frying time has elapsed and hang it on the
hook in the pan so the oil can drip off.
ReStaRt
In case of overheating, the fryer will switch off automatically. This safety
mechanism can be found at the back off the electrical part. If it switches
off, it can be reactivated by pressing in the button with a long pointed
object. The button is situated deep behind the hole. First remove the plug
of the device from the socket.
coNSIDeRatIoNS FoR uSINg the FRyeR
Do:
• Only use the fryer for household appliance.
• Only use the fryer for frying food.
• Only use oil or grease that is suitable for frying. Check the packaging if
the fat or oil is suitable for this fryer.
• Ensure the level of the fat or oil is higher than the minimum and less
than the maximum, so between the minimum and maximum lines.
If there is too much fat or oil in the fryer, it may be overflow the fryer.
• Be careful when frying, make sure the fryer is used safely by keeping
enough distance between the user and the device. Make sure that
people who need extra help or supervision can't reach the fryer.
• Have patience and wait until the fryer has reached the right temperature.
Deep fryer stainless steel 3,0 L
eN
11