Application As Directed - Lenze i500 Serie Montage- Und Einschaltanleitung

Safety instructions

Application as directed

Application as directed
• The product must only be operated under the operating conditions prescribed in this documentation.
• The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
• The product is not a machine in terms of 2006/42/EC: Machinery Directive.
• Commissioning or starting the operation as directed of a machine with the product is not permitted until
it has been ensured that the machine meets the regulations of the EC Directive 2006/42/EC: Machinery
Directive; observe EN 60204−1.
• Commissioning or starting the operation as directed is only allowed when there is compliance with the
EMC Directive 2014/30/EU.
• The harmonised standard EN 61800−5−1 is used for the inverters.
• The product is not a household appliance, but is only designed as component for commercial or profes-
sional use in terms of EN 61000−3−2.
• The product can be used according to the technical data if drive systems have to comply with categories
according to EN 61800−3.
In residential areas, the product may cause EMC interferences. The operator is responsible for taking
interference suppression measures.
• The product must only be actuated with motors that are suitable for the operation with inverters.
• Lenze L-force motors meet the requirements
• Exception: m240 motors are designed for mains operation only.
46