Safety Instructions; Basic Safety Instructions; Application As Directed - Lenze i410 Montage- Und Einschaltanleitung

Safety instructions

Application as directed

Safety instructions
Disregarding the following basic safety measures and safety information may lead to severe personal injury
and damage to property!
Observe all specifications of the corresponding documentation supplied. This is the precondition for safe
and trouble-free operation and for obtaining the product features specified.
Please observe the specific safety information in the other sections!

Basic safety instructions

Personnel
The product must only be used by qualified personnel. IEC 60364 or CENELEC HD 384 define the skills of
these persons:
• They are familiar with installing, mounting, commissioning, and operating the product.
• They have the corresponding qualifications for their work.
• They know and can apply all regulations for the prevention of accidents, directives, and laws applicable at
the place of use.
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to check whether
they can be adapted to the particular applications. Lenze does not take any responsibility for the suitability
of the procedures and circuit proposals described.
The procedural notes and circuit details described in this document are only proposals. It is up to the user to
check whether they can be adapted to the particular applications. Lenze does not take any responsibility for
the suitability of the procedures and circuit proposals described.
Device protection
• The maximum test voltage for insulation tests between a control potential of 24 V and PE must not
exceed 110 V DC (EN 61800−5−1).
Application as directed
• The product must only be operated under the operating conditions prescribed in this documentation.
• The product meets the protection requirements of 2014/35/EU: Niederspannungsrichtlinie.
• The product is not a machine in terms of 2006/42/EU: Maschinenrichtlinie.
• Commissioning or starting the operation as directed of a machine with the product is not permitted until
it has been ensured that the machine meets the regulations of the EU Directive 2006/42/EU: Maschinen-
richtlinie; observe EN 60204−1.
• Commissioning or starting operation as directed is only permissible if the EMC Directive 2014/30/EU is
complied with.
• The harmonised standard EN 61800−5−1 is applied.
• The product is not a household appliance, but is only designed as a component for commercial or profes-
sional use in terms of EN 61000−3−2.
• The product can be used according to the technical data if drive systems have to comply with categories
according to EN 61800−3.
In residential areas, the product may cause EMC interferences. The operator is responsible for taking
interference suppression measures.
• The product must only be actuated with motors that are suitable for the operation with inverters.
- Lenze L-force motors meet the requirements
- Exception: m240 motors are designed for mains operation only.
32