Functional Description; Intended Use - Bosch EXACT 2 Originalbetriebsanleitung

OBJ_BUCH-529-001.book Page 21 Wednesday, December 5, 2007 12:18 PM
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Before any work on the machine (e.g., main-
tenance, tool change, etc.) as well as during
transport and storage, set the rotational di-
rection switch to the centre position. Unin-
tentional actuation of the On/Off switch can
lead to injuries.
Hold the machine with a firm grip. High re-
action torque can briefly occur while driving
in and loosening screws.
Use only flawless tool bits that are not
worn. Defective tool bits can break, for ex-
ample, and cause injury or damage.
When working with an application tool, pay
attention that the application tool is firmly
seated on the tool holder. When the applica-
tion tool is not firmly connected with the tool
holder, it can come loose again and not be
controlled.
Be careful when long screws are screwed
in. Depending on the type of screw and the
tool bit used, there is a danger of slipping.
Long screws are often difficult to control and
the danger exists that the tool bit may slip off
the fastener head and cause injury.
Pay attention to the direction of rotation
that is set before switching on the power
tool. For example, when a screw is to be
loosened and the direction of rotation is set
so that the screw is tightened, this can lead
to a strong torque reaction of the power tool.
Do not use this tool as a drill. Tools
equipped with shut-off clutches are not de-
signed for drilling applications. The clutch
can shut off automatically and without warn-
ing.
Battery
Avoid unintentional switching on. Ensure
the On/Off switch is in the off position be-
fore inserting battery pack. Carrying the
power tool with your finger on the On/Off
switch or inserting the battery pack into
power tools that have the switch on invites
accidents.
Bosch Power Tools
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e.g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
Do not short-circuit the battery. There is
danger of explosion.
Battery leakage may occur under extreme
usage or temperature conditions. When a
rechargeable battery leaks, avoid contact
with the skin or eyes. The battery liquid is
caustic and could cause chemical burns to
tissues. If liquid comes in contact with skin,
wash quickly with soap and water, then with
lemon juice or vinegar. If the liquid contacts
your eyes, flush them with water for a mini-
mum of 10 minutes and seek medical atten-
tion.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

This power tool is intended for the fastening and
loosening of bolts, nuts and various threaded
fasteners in the specified dimension and per-
formance range. This power tool is not intended
for use as a drill; to avoid personal injury or dam-
age to the tool, do not use any tool with a shut-
off clutch for drilling purposes.
3 609 929 B57 | (5.12.07)
English | 21