Technical Data - IKEA RENLIG DWTI60 Bedienungsanleitung

ENGLISH
Problem
The baskets are loaded incorrectly
so that water cannot reach all surfa-
ces.
Spray arms do not turn freely be-
cause of incorrect arrangement of
the load.
The filters are dirty or not correctly in-
stalled.
The quantity of detergent is too little
or missing.
Limescales The salt container is empty.
particles on
The water softener is adjusted on a
the dishes
wrong level.
The salt container cap is not closed
correctly.
The dishes are No rinse aid has been used.
wet and dull
The rinse aid dispenser is empty.
There are Wrong dosage of rinse aid.
streaks, milky
spots or a blu-
ish coating on
glasses and
dishes
Dry water Wrong dosage of rinse aid.
drop signs on
The detergent can be the cause.
glasses and
dishes

Technical data

Dimensions
Water supply pressure
Capacity (place settings)
Energy class
Washing class
Drying class
Possible cause
Width (cm)
Height (cm)
Depth (cm)
1) Minimum
Maximum
12
A
A
A
Solution
Load the baskets correctly.
Make sure that the cutlery and
dishes do not block the spray arms.
Make sure that the filters are clean
and installed correctly.
Make sure that the quantity of deter-
gent in detergent dispenser is correct.
Fill the salt container with salt.
Set the water softener.
Make sure that the salt container is
closed correctly.
Set the rinse aid dosage.
Fill the rinse aid dispenser.
Decrease the rinse aid dosage.
Increase rinse aid dosage.
Use different type of detergent.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
18
59,6
85,8-93,8
55,0