E) Operation With The App; F) Viewing Pictures Or Videos; G) Saving Pictures Or Videos On The Microsd-Card - Reely 1577674 Bedienungsanleitung

e) Operation with the App

When the quadrocopter is ready to start and the app is activated in your Smartphone with "Play", you will receive a
live image from the quadrocopter camera. You can start at once and – if desired – fly the quadrocopter in FPV mode
using the camera images. The model is controlled by the transmitter here.
Additionally, you can take a picture with the quadrocopter camera or start a video recording (figure 14, item 2 or 3) on
the display of your Smartphone before or during operation of the quadrocopter by selecting the respective symbol.
You cannot use the app to take serial pictures. The camera is activated when you touch the camera icon
(figure 14, item 2). A picture will be created after releasing the symbol. During a video recording, a clock is
displayed for the recording time.
Stop video recording by selecting the video camera icon (figure 14, item 3) again. The recording is ceased,
the stop watch is concealed and the recording is saved.
During a video recording, it is also possible to take additional pictures.

f) Viewing Pictures or Videos

When you have stopped flying, you can view the first pictures or videos on your Smartphone right away. For this,
choose the corresponding symbol on your Smartphone (figure 14, item 4). New screen content will appear.
Select either "Pictures" or "Video". Depending on your selection, another screen content will appear with the saved
pictures or videos. You can open them for viewing by tapping them. To delete pictures or videos, select the corre-
sponding file (touch it for a longer time) and then following the screen instructions.

g) Saving Pictures or Videos on the MicroSD-Card

The quadrocopter has a card slot for a MicroSD-card below the battery compartment lid. Like the recordings saved on
your Smartphone, you can save these pictures and videos onto an inserted MicroSD-card in parallel (not enclosed,
must be purchased separately).
Insert the MicroSD-card in such a way that the script on the memory card points down. Carefully push the memory
card into the card slot until the MicroSD-card latches audibly. To switch the memory card, push it carefully into the card
slot until you hear a "clicking" sound and the latching mechanics release the memory card. Then the memory card will
be pushed out a bit and you can remove it.
A suitable card reader can be used to read the MicroSD-card on your computer and save the pictures and videos
locally on your computer.
69