Electrical Installation; Emc−Compliant Installation - Lenze Drive PLC Montageanleitung

6

Electrical installation

EMC−compliant installation
0
3
1 2 0
1
0
Mounting plate with electrically conductive surface.
1
Ground the cable shield with a large−area connection to PE (PES: HF shield connection via PE
connection).
Use the enclosed fixing brackets.
2
Signal cable for analog input and output signals.
Always use a shielded cable.
3
Signal cable for the system bus (CAN), with bus terminating resistor (120 W).
Always use a shielded cable.
EDK10200EV3 DE/EN/FR 7.0
2
l
Electrical installation
EMC−compliant installation
6
plc013
57