Küppersbusch ITE1260-2 Benutzerinformation Seite 10

10
Problem
The appliance is noisy.
Audible or visual alarm is on.
Power indicator light is flash-
ing.
The compressor operates
continually.
There is too much frost and
ice.
Possible cause
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The appliance is not suppor-
ted properly.
The cabinet has been recent-
ly switched on or the temper-
ature is still too high.
The temperature in the appli-
ance is too high.
An error has occurred in
measuring the temperature.
The appliance is not working
properly.
The temperature in the appli-
ance is too high.
Temperature is set incorrect-
ly.
Many food products to be
frozen were put in at the
same time.
The room temperature is too
high.
Food products placed in the
appliance were too warm.
The door is not closed cor-
rectly.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Solution
Connect the mains plug to
the mains socket correctly.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified electri-
cian.
Check if the appliance stands
stable.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
Contact a qualified electrician
or contact the nearest Au-
thorized Service Centre.
Contact a qualified electrician
or contact the nearest Au-
thorized Service Centre.
Contact a qualified electrician
or contact the nearest Au-
thorized Service Centre.
Refer to "Operation" chapter.
Wait some hours and then
check the temperature again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "Closing the door".
Refer to "Closing the door".