Skandika Fitness ares Aufbau- Und Bedienungsanleitung Seite 26

COMPUTER INSTRUCTIONS
8. A list will appear with available devices. First select the chest belt to link and then select the
device. The chest belt display will turn off, if there are no pulse signals detected for more than 10
seconds.
9. If you can see your fitness device's name on the screen (as per example below) the link is ok. To
disconnect, touch the device button again.
10. As the app allows multi-user records, it is recommended to fill in your personal data within the
app first.
App contents:
Quick start
Start manually without any settings.
Tap "Resistance" to change resistance level. The slider bar appears for 3 seconds.
Tap the "Heart" symbol to show the heartrate chart. Tap the return arrow to exit to main screen.
Programs
Here you may select pre-defined programs for your exercise.
Map Virtual Navigation
You may select 2 points on the map. You may then virtually explore the route by exercising with your
fitness device. If asked, allow to use the current location of user. Where street views are available,
these will be shown in your app.
History list
The records include:
Time, Distance, Calories, Speed, Pulse, Date, Device name and other details.
Android, iOS and Bluetooth compatibility:
Android System
BT-Dual Modus SPP*
BT4.0-BLE(single mode) only
Android 4.3 or earlier
Android 4.4 or later
*BT-Dual mode SPP module works with both BT3(or 2) and BT4.0-BLE modes under Android.
*iOS only works in BT-BLE mode.
26