Error Messages - Skandika Fitness ares Aufbau- Und Bedienungsanleitung

Error messages

ERROR 1 (E1)
Connection to gear motor (motor signal) is lost for more than 4 seconds. During power-on, the gear
motor will return to initial position automatically. Contact the customer service.
ERROR 2 (E2)
Memory error. Disconnect from mains source and retry after 1 minute. If problem still exists, contact
the customer service.
ERROR 3 (E3)
Motor cannot leave zero position. Contact the customer service.
Technical data of the power adaptor
Linear transformer
1. Input: 230V 50/60Hz - Output: 6V DC/0.5A
2. Input: 110V 50/60Hz - Output: 6V DC/0.5A
Switch type transformer
Input: 110V~240V 50/60Hz - Output: 9V DC/0.5A
App users' guide
Compatibility
a. Android® 4.4 or later, Bluetooth® dual mode / BLE (Bluetooth Low Energy)
b. APPLE® iOS® devices with Bluetooth® Version 4.0 only.
1. Turn on Wi-Fi (WLAN) to connect to the internet
2. Download the app from App Store® or Delightech website: appfit.biz. Alternatively, you may scan
the below QR-Code. Click the green robot icon for Android® and the "iOS" icon for iOS® devices.
3. For Android® devices only: Allow "unknown sources" option in system security settings.
For iOS devices only: Enter System Settings -> General->Profiles for iOS System and adjust De-
lighTech Corporation as verified developer as shown on the next page.
4. Enable and connect via Bluetooth®.
5. Run the app.
6. Switch on the fitness device.
7. Enter "Setting" and touch "Connect to device" icon.
COMPUTER INSTRUCTIONS
25