Timer Controlled-Recording - TechniSat DIGIT HD4 CX Bedienungsanleitung

> To proceed with playing the program from this spot, again press the yellow function key Play/
Pause. You will now view the program shifted in time relative to the live broadcast (Timeshift),
while the ongoing current program will continue to be recorded in the background.
Option 2
> If you have to interrupt viewing a program, e.g. because of a phone call, etc., you can
interrupt viewing of the program by pressing the yellow function key Play/Pause, at the
same time starting recording of the current program. While the recording is started in the
background, a still image appears on screen.
> To proceed with playing the program from this spot, again press the yellow function key Play/
Pause. You will now view the program shifted in time relative to the live broadcast (Timeshift),
while the ongoing current program will continue to be recorded in the background.
Ending a recording manually
To end the recording procedure, first press OK.
> Now press the green function key to go to the PVR navigator.
> Use the arrow keys up/down to mark the current recording, and confirm by pressing OK.
The program slot of the current recording will now be selected.
> Now press the green function key Stop. A query will appear.
> Use the arrow keys up/down to select Save in order to save the recording on the external
USB drive, or select Discard, in order not to save the program, and confirm by pressing OK.

7.4.4. Timer controlled-recording:

Receiver can record programs on the external USB drive in your absence, using the hard
drive timers. In addition, your receiver is equipped with video recorder timers and channel
switching timers. In terms of their programming, these Timer types differ only in name. During
standby mode, hard drive and video recorder timers are indicated by a clock symbol.
External USB timer
In the case of this function, your digital receiver will be switched on and off for the
recording, so this can be recorded in your absence. If the unit was switched on by the
hard drive timer, this will be indicated by "_ PVR Timer" in the display. Some of the remote
control functions will be deactivated.
Manual programming of timer
Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Manage timer.
> Confirm by pressing OK.
The sub-menu Manage Timer will be displayed.
> Go to the settings of the timer as describe under point 6.3
17
DIGIT HD 4 CX DE_EN_PL.indd 17 7/4/10 09:28:31