Yamaha TTR125 Fahrer- Und Wartungshandbuch Seite 280

CARBURETOR
3. Install:
Carburetor top cover 1
G
Starter plunger 2
G
Air vent hose 3
G
Over flow hose 4
G
Fuel hose 5
G
NOTE:
Align the slit a of the throttle valve with the tab
b of the carburetor body.
CAUTION:
In order to release the starter cable from
the twist, install the starter knob after tight-
ening the nut for the starter plunger.
4. Adjust:
Idle speed
G
Refer to "ENGINE IDLING SPEED
ADJUSTMENT" section in the CHAP-
TER 3.
4 - 11
ENG