Yamaha TTR125 Fahrer- Und Wartungshandbuch Seite 562

REAR SHOCK ABSORBER ASSEMBLY
3
1
a
b
= 0~2 mm
(0~0.08 in)
2
4. Install:
TT-R125LWE
Rear shock absorber assembly sub-
G
tank 1
Screw clamp 2
G
Locking tie 3
G
NOTE:
Install the rear shock absorber assembly
G
sub-tank so that its bottom portion directs as
shown and lightly touches the projection a
on the frame.
Install the rear shock absorber assembly
G
sub-tank with a clearance b between the
sub-tank and frame.
Fasten the sub-tank hose with the locking tie.
G
Refer to "CABLE ROUTING DIAGRAM" sec-
tion in the CHAPTER 2.
5 - 69
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)