Yamaha YZ250FN Fahrer- Und Wartungshandbuch Seite 290

2
1
1
4 - 18
CARBURETOR
2. Install:
Carburetor 1
NOTE:
Install the projection between the carburetor
joint slots.
3. Tighten:
Screw (air filter joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
4. Install:
Throttle cable 1
5. Adjust:
Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
6. Install:
Throttle cable cover 1
Screw (throttle cable cover) 2
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
Install the throttle cable cover with its pawl a
hung on the carburetor.
7. Install:
Throttle position sensor lead coupler 1
Clamp 2
Refer to "CABLE ROUTING DIA-
GRAM" section in the CHAPTER 2.
ENG