MAXDATA PRO 7000X Benutzerhandbuch Seite 84

Appendix B - Troubleshooting
The screen is not working.
Possible cause of the problem: The energy saving mode is activated.
Note: The suspend LED flashes.
Troubleshooting:
o Operate the on/off button.
Possible cause of the problem: The screen settings are incorrect.
Troubleshooting:
o Press the spacebar, several times if necessary.
o If an external monitor is connected, switch it on.
Possible cause of the problem: In the system settings, a different
screen type to the existing one is set.
Troubleshooting:
o Press the Fn + F3 key combination.
o If an external monitor is connected, connect it
power
contrast
this topic in the
The system stops working.
Possible cause of the problem: An energy saving function has been
activated.
Note: The screen switches itself off.
Troubleshooting:
Press any key, or press the on/off button if none of the status LEDs are
lit.
84
supply and switch it on. Also check the brightness and
settings (you can find additional information on
advanced service handbook).
to a