Configuring An Automatically Created Account As The Standard Voip Account For An Auerswald Pbx - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

Commissioning
3.
Tap on IP address and then enter a permanent IP address for the tele-
phone.
Tip: The entry can be made either via the digit keys or by tapping several
times or by clicking and holding the + and - buttons.
4.
Tap on OK.
5.
Tap on Net mask and then enter a subnet mask for the telephone.
6.
Tap on OK.
7.
Tap on Gateway and then enter a gateway for the telephone.
8.
Tap on OK.
9.
Tap on DNS server 1 and then enter a DNS server for the telephone.
10.
Tap on OK.
11.
Press the Home key to get to the start page.
12.
Tap on No account configured.
13.
Proceed with
Configuring an Automatically Created Account as the Standard
VoIP Account for an Auerswald PBX
Requirements
– Setup assistant started (All apps > Settings > Setup assistant)
– Account displayed under Inactive or unregistered accounts (e.g.
Account 001)
Steps to Take
1.
Tap on the account displayed under Inactive or unregistered accounts
(e.g. Account 001).
2.
Tap on Standard VoIP account.
Tip: Tap on the buttons to the left on the display to go back to one of the
previous configuration steps, if required.
60
The message No account configured is shown on the display.
The setup assistant is automatically started.
Step 5. on page
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
58.