Creating An Announcement For The Answering Machine (Only Comfortel 2600) - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Important: If the initialisation is not successful after inserting the memory
card (
Further steps
Create one or more separate announcements (see
Configure the answering machine according to your requirements. Carry
out the configuration either using the menu on the telephone display (see
the Operation and Configuration Instructions on the CD included in the
package) or using the PC-software included in the package (recom-
mended; see
Note: If you would like to remove the card, you can unlock it by lightly
pressing on memory card.
Creating an Announcement for the Answering Machine (only
COMfortel 2600)
Requirements
– Answering machine put into operation
1.
Press the menu key.
2.
Tap successively on answer.machine > settings > edit announcem. >
new announcement.
3.
Enter a name for the announcement using the keypad.
4.
Tap on OK to complete the entry.
5.
Tap on OK to start the recording.
6.
Record the announcement.
7.
Tap on OK to stop the recording.
8.
Tap on playback.
9.
Tap on store.
Note: If you are not satisfied with the results, tap on new announcement.
After doing this, you can make a new recording.
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013
is still visible with short interruptions), the card is not supported.
Page 57).
You will hear the announcement you just recorded.
Commissioning
Page 53).
53