Carrying Out Initialisation - Kessel SE NS 2 Bedienungsanleitung

3.4.4

Carrying out initialisation

Operation of the control unit is described in
During initialisation, the following input is expected:
• Language
• Date / Time
• Number of heating elements
• Standard
• Nominal size
Language
• Press OK.
• Use the cursor keys to select the language and confirm with OK, the menu
Date / Time
• Set the respective flashing figure in date and time and confirm with OK. Following the last entry, the menu
Number of heating
Number of heating elements
• Do not carry out any settings and press ESC.
• Press down cursor key, the menu
Standard
• Use the cursor keys to select the standard required and confirm with OK, the menu
Nominal size
• Use the cursor keys to select the nominal size required and confirm with OK, the menu
initialisation is complete.
2017/10
Installation
➲
elementsappears.
Standard
Chapter 5 on page 60.
appears.
53 / 108
Date/Time appears.
Nominal size appears.
0. System info appears,
010-913