Installing Power Supplies - Dell PowerConnect B-MLXe Serie Handbuch Zum Einstieg

FIGURE 9
Installing a module in a B-MLXe-16 chassis
Power supply, switch fabric, and fan requirements
For details on power supply, switch fabric, and fan requirements for modules installed in PowerConnect B-MLXe
Series units, refer to your hardware installation guide.

Installing power supplies

Table 2 lists the number of power supplies (AC or DC) installed in the PowerConnect B-MLXe Series at the factory and
the maximum that you can install in each unit to add redundancy.
TABLE 2
Power supplies for B-MLXe Series
Chassis Type Installed Power
Supplies
4-slot 1
8-slot 2
16-slot 4
DANGER
High Touch Current. Earth connection is essential before connecting supply.
Power supply installation steps
Follow these steps to install a power supply. You need a small Phillips or flat-head screwdriver to perform this task.
18
Maximum
Power Supplies
3
4
8
PowerConnect B-MLXe Getting Started Guide
53-1001995-01