Introduction - Canon GP-E2 Bedienungsanleitung

Introduction

The GPS Receiver GP-E2 can geotag your shots and record the route
you travel. You can view shooting locations and the route traveled in Map
Utility (GP-E2 software, p.29). The receiver can also set the camera time.
Before Use
Before use, check whether your camera menu displays [GPS device
settings].
Example of menu display
EOS 5D Mark III and EOS 7D Users
If [GPS device settings] is not displayed on your EOS 5D Mark III or
EOS 7D camera, update the camera firmware to a version compatible
with the receiver. The menu item will be displayed after you update the
firmware.
For details, contact a Canon Service Center.
With the EOS 7D, you cannot append the shooting direction data to the
images. (It cannot use the receiver's digital compass.)
With certain cameras other than the EOS 7D, you also cannot append
the shooting direction data to the images. (They cannot use the
receiver's digital compass.) For details, refer to the camera's instruction
manual or Canon Web site.
2
Cameras that display the settings
The functions described in this
manual are supported by the receiver.
(With certain cameras, some
functions cannot be used.)
Cameras that do not display the
settings
Geotagging images (and adding
direction information) is not supported
while shooting.
Only the logging function (<LOG>
mode) is available. To geotag images,
you can import log files to Map Utility
(GP-E2 software, p.29).