Setting The Positioning Interval - Canon GP-E2 Bedienungsanleitung

Setting the Positioning Interval

You can specify the positioning interval when the receiver is attached or
connected to a camera that displays the [GPS device settings] menu
item. Shorter positioning intervals yield more accurate location information
for your images. However, this also consumes more battery power.
Positions of cameras without this menu item are determined every
15 seconds, and this interval can be changed with Map Utility (GP-E2
software, p.29).
Select [GPS device settings].
1
On the EOS-1D X and other models
that display the following screen, set
[GPS device] to [Enable], and then
select [GPS device settings].
Select [Position update timing].
2
Select the time.
3
21