Attachments On Request - Honda HF1211 Originalbetriebsanleitung

PROBLEM SITUATION
8. Uneven cut and Key in «ON»,
poor grass collection engine running
9. Unusual vibrations Key in «ON»,
while working engine running
If problems continue after having carried out these operations, contact your Dealer.
WARNING!
Do not take on complicated repair work if you don't have the necessary equipment and the technical know ledge.
The guarantee is automatically revoked and the manufacturer declines all responsibility for any repairs which are badly done.

9. ATTACHMENTS ON REQUEST

1. KIT FOR "MULCHING"
CG99900036H0
It chops the grass cuttings finely
and leaves them on the lawn,
instead of collecting them in the
grass catcher.
WARNING!
For your safety it is strictly prohibited to fit
any other attachment other than those included in the above
list, they have been exclusively designed for the model and
type of machine you are using.
EN 20
LIKELY CAUSE
– cutting-means assembly is not parallel to
the ground
– inefficient cutting means
– forward speed too high compared
to height of grass
– discharge chute is obstructed
– cutting-means assembly is full of grass
– the cutting means is not balanced
– the cutting means is loose
– fixing screws loose
– the cutting-means assembly is clogged
SOLUTIONS
– check tyre pressures
– reinstate the parallelism of the cutting-means assembly in
relation to the ground
– check that the cutting means is fitted properly
– sharpen or replace the cutting means
– check the tension of the belt
– reduce the forward speed and/or raise the cutting-means
assembly.
– wait for grass to dry
– remove the grass catcher and empty the discharge chute
– clean the cutting-means assembly
– balance or replace the damaged cutting means
– check the cutting means is fastened in place
– check and tighten all the fixing screws of engine
and the machine
– remove the grass catcher, empty the discharge chute and
clean the inside of the cutting-means assembly