Detaching And Attaching The Front Panel; Resetting The Unit; Fuse Replacement - Sony MEX-N6002BD Bedienungsanleitung

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 6).

Resetting the unit

For details, see "Resetting the Unit" (page 7).

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
34
GB



Fuse (10 A)