Werbung
Verfügbare Sprachen
Verfügbare Sprachen
No.
Description
1
Hex screw and washer (M6 × 18)
2
Rubber foot
3
Hex screw and washer (M4 × 12)
4
Bottom cover
5
Base
6
Switch plate
7
Hex screw (M4 × 10)
8
End bell
9
Spring washer (35)
10
Capacitor
11
Switch
12
Hex screw and washer (M4 × 8)
13
Stator
14
Power cord clip (6P4)
15
Power cord with plug
16
Capacitor bracket
17
Hex nut (M8)
18
Hex nut (M6)
19
Sand belt guard plate
20
Rotator
21
Hex screws
22
Limit plate
23
Washer (D4)
24
Hex screw (M4 × 10)
25
Belt guard locking knob
26
Belt protection guard
27
Belt support cover
28
100-grit sanding belt (25.4 × 762 mm)
29
Driven wheel
30
External circlip (D15)
31
Bearing (6202)
32
Shaft
33
Hex set screw (M6 × 8)
34
Hex screw and washer (M5 × 16 left)
35
Locking plate
36
Driving wheel
37
Hex screw (M6 × 10)
38
Hex bolt (M10 × 25)
39
Right housing
11. Warranty
HBM Machines stands behind the quality and craftsmanship of our products. This warranty is applicable to all products purchased directly from our company or authorised
retailers.
Limited Warranty:
Our products are covered by a limited warranty against defects in materials and workmanship for 2 years. During the warranty period, if a product is found to have a
manufacturing defect, we will, at our discretion, repair or replace the defective product, or provide a refund equal to the purchase price.
Exclusions:
This warranty does not cover damages resulting from misuse, abuse, negligence, improper installation, accidents, normal wear and tear, acts of nature, or unauthorized
modifications or repairs. Additionally, this warranty does not cover damages or defects arising from non-compliance with our product instructions, specifications, or
recommended usage guidelines.
Claim Process:
To initiate a warranty claim, the original proof of purchase, such as a receipt or order number, will be required.
To determine if a product qualifies for warranty coverage, we may request additional information or evidence of the defect, such as photos or a return of the product. Contact our
customer service team directly to discuss and initiate a warranty claim. Details on how to contact us can be found on our website or included with the product documentation.
Other Terms and Conditions:
• This warranty is non-transferable and only applies to the original purchaser.
• We reserve the right to amend or modify this warranty at any time without prior notice. The warranty in effect at the time of purchase will apply.
• This warranty grants specific legal rights, and you may also have other rights that vary based on local laws or regulations.
Please refer to our website or contact our customer service team for additional information or inquiries regarding our warranty coverage.
12
Qty.
No.
Description
2
40
Hex set screw (M6 × 20)
4
41
Belt work table
4
42
Washer (D8)
1
43
Belt guard locking knob
1
44
Tracking guard
1
45
Guide spring
2
46
Locking nut (M10)
1
47
Tracking plate
1
48
Tracking spring
1
49
Tracking adjustment knob
1
50
Hex set screw (ST4.2 × 16)
2
51
Pin (3 × 20)
1
52
Tracking shaft
1
53
Tracking spring
1
54
Washer (D5)
1
55
Split washer (3.5)
2
56
Dust port
1
57
Angle indicator
1
58
Lock washer (D4)
1
59
Hex screw (M4 × 6)
1
60
Mitre gauge knob
1
61
Hex nut (M4)
2
62
Mitre gauge rest
2
63
Mitre gauge rail
1
64
Disc work table
1
65
Washer (D6)
1
66
Disc table locking knob
1
67
Hex screw and washer (M4 × 8)
2
68
Inner hex bolt (M6 × 16)
2
69
Lock washer (D6)
4
70
Disc
1
71
Disc end shield
1
72
Screw and flat washer assembly (M4 × 153)
1
73
Flat washer (M4)
2
74
Hex screws (M4 × 12)
1
75
Disc (125 mm)
3
76
Strain relief plate I
1
77
Strain relief plate II
1
78
Hex screws (M4 × 18)
Qty.
1
1
1
1
1
1
1
1
1
1
4
1
1
1
2
1
1
1
1
1
1
4
1
1
1
2
2
3
1
1
1
1
4
2
2
1
1
1
2
Werbung
