Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. The voltage is too low
L
IGHTING IS ON
3. Faulty energy supply.
4. Motor bearing defective.
2. Motor defective.
2. One-way valve leaking.
2. Motor not properly installed.
4. Hood not properly secured.
P
OSSIBLE CAUSE
3. Mounting bracket / plate not
properly installed.
4. Fastening
screws
tightened.
3. The extractor hood is not switched
on.
4. One or all bulbs are defective.
I
2. Distance between hood and hob too
large.
,
BUT THE ENGINE IS NOT RUNNING
T
HE ENGINE SMELLS SUSPICIOUS
T
RACES OF OIL
D
EVICE VIBRATES
D
EVICE IS UNSTABLE
not
firmly
T
HE LIGHTING IS NOT WORKING
NSUFFICIENT EXTRACTION PERFORMANCE
10. Compare the information on the
rating plate with the information
provided by your electricity supplier.
3. Check the power supply.
4. Replace motor.
2. Replace motor.
.
3. Seal the one-way valve.
.
2. Fasten the motor properly.
3. Fasten the hood properly.
E
RROR
.
3. Mount the mounting bracket / plate
correctly
4. Tighten the fixing screws firmly.
3. Switch on the extractor hood.
4. Replace the defective bulbs. See
chapter " R
".
BULBS
P
LEASE NOTE
be replaced by a qualified specialist
(electrician).
2. Lower the hood.
~ 73 ~
.
.
M
EASURES
.
EPLACING THE
: LED lamps may only
.
LED
Werbung
