Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.3 Replacing the LED light source
WARNING! LED light sources may only be replaced by a qualified
person. Never replace the bulbs yourself. If the LED lamps are damaged,
contact a qualified specialist (electrical engineer) / (no warranty!).
WARNING! Disconnect the appliance from the power supply
(appropriate fuse in the house fuse box) before replacing the LED lamps.
RISK OF ELECTRIC SHOCK!
NOTE! Do not touch the new LED light sources with bare hands. Finger
perspiration reduces the durability of the LED lamps. Use a thin cloth or
thin fabric gloves.
--- m = 0.45 m
NOTE! Any damage caused by improper and incorrect replacement of the
LED lamps is not covered by the warranty.
7. troubleshooting
P
OSSIBLE CAUSE
2. The appliance is not connected to
the socket with the mains plug.
7. The mains plug is loose.
7. The socket is not supplied with
power.
8. The corresponding fuse is switched
off.
Required minimum distance to surfaces such as pot lids, pot
holders etc. to avoid parts becoming hot and fire risks.
Only self-shielding light sources may be used to avoid parts
becoming unreasonably hot, fire risks and exposure to UV
radiation.
E
D
EVICE DOES NOT WORK
~ 72 ~
RROR
M
.
6. Connect the appliance properly to
the socket.
6. Check the mains plug.
8. Check the socket in question by
connecting another appliance to it.
9. Check the house fuse.
EASURES
Werbung
