12. Be sure to remove all accessories from the packaging and the
polystyrene components!
13. Do not use any aggressive or corrosive cleaning agents or sharp-
edged objects to clean the appliance, as these will scratch the
surface. RISK OF DAMAGE!
14. Constant care and maintenance ensure flawless operation and
optimum performance of your appliance.
15. Before connecting the appliance, check that the mains cable or the
appliance itself is not damaged.
16. The type plate must never be made illegible or removed! If the
rating plate has been defaced or removed, all warranty claims
are void!
READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM
No liability for personal injury or material damage will be accepted if these
instructions are not followed.
2. installation
NOTE! Any damage caused by an improperly installed and/or
improperly connected device is not covered by the guarantee or warranty.
We recommend having the extractor hood installed by qualified specialists. Any
damage caused by improper installation of the appliance is not covered by the
guarantee or warranty.
2.1 General installation instructions
➢
Before installing the appliance, the wall/ceiling of the installation room must be
checked for load-bearing capacity and load-bearing capacity.
➢
This device may only be installed in a suitable location.
➢
Check the route of electrical and other cables in the installation area; this will
prevent these cables from being accidentally drilled into.
➢
Clean the surrounding area thoroughly before installation. This will prevent dust
or building debris from being sucked in when the appliance is first used.
➢
During installation, make sure that the cooker hood hangs horizontally to avoid
grease accumulating in one corner of the hood.
IN A SAFE PLACE.
~ 49 ~