Werbung
CORDLESS IMPACT DRIVER
PDSSA 20-Li A1
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as described
and for the range of applications specified . Please
also pass these operating instructions on to any
future owner .
Intended use
This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts . The appliance has clockwise/
anticlockwise rotation, a 1/4" hexagon socket bit
holder and an LED working light . The light on this
appliance is intended to illuminate the immediate
work area of the appliance . The rotary impact
function of the appliance enables the power of the
motor to be converted into uniform rotary impacts .
The impact mechanism comes into effect during
tightening and loosening .
The appliance is designed for use by adults .
Young people under 16 years of age may only
use the appliance under supervision . The manufac-
turer accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance .
Use this product only as described and for the
areas of applications specified . The appliance is
not intended for commercial use . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse .
■
2
│
GB │ CY
Features
Tool holder
Locking sleeve
Bit holder (magnetic)
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
LED work light
ON/OFF switch/Speed control
Adapter to 1/4" square
Bit holder
High-speed charger*
Red charge control LED
Green charge control LED
Package contents
1 cordless impact driver PDSSA 20-Li A1
1 a dapter from hex (1/4") to square
1 1/4" extension (50 mm)
1 belt clip
1 carrying case
1 set of operating instructions
Technical data
Cordless impact driver PDSSA 20-Li A1
Rated voltage
Idle speed
Rated stroke rate
Max . torque
Suitable for metal screws
Suitable for wood screws
Tool holder
20 V
(DC)
n
0–2800 rpm
0
0–3600 ipm
180 Nm
≤ M8
≤ 8 mm Ø
1/4"
PDSSA 20-Li A1
Werbung
