Herunterladen Diese Seite drucken

OBI HWW 3500 Originalbetriebsanleitung Seite 33

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
Error/Fault
Delivery rate too low.
Not enough pressure.
Pump does not switch off.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
Cause
Water shortage?
Does not convey correctly any longer? Check the pressure in the tank.
Suction pipe not sealed?
Suction height too high?
Filter blocked or soiled?
Check valve blocked?
Water leak between motor and
pump, shaft sealing is not sealed?
Pump is blocked or defective?
Air in the pump or suction pipe?
Pressure switch misaligned?
Rubber bellow in tank unsealed?
Changed suction conditions in
spring (springs e. g. covered in
sand)?
Suction pipe sucked in on the
ground?
Cut-out pressure set too high?
Pressure side unsealed?
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
Technical data
Item number
Model
Rated voltage
Rated power
Protection type
Characteristic curve
Max. supply height
Max. suction height
Max. flow rate
Max. liquid temperature
Pressure/suction pipe diameter 25 mm (1")
Pre-charge pressure
Accessories
Accessories are available from your local vendor.
Remedy
Ensure sufficient water supply.
Seal suction pipe, tighten screwed
connections.
Observe maximal suction height
(► Technical data – p. 33).
Suction height must be deducted
from the conveyance height.
Clean or replace filter.
Clean or replace valve.
Contact your local vendor.
Clean the pump with clean water
and remove the cause of the con-
tamination.
Fill pump case with water.
For suction pipes with check valve,
fill suction pipe with water.
Contact your local vendor.
Contact your local vendor.
Check spring and water quality.
Shorten or fasten suction pipe.
Use filter screen with check valve.
Contact your local vendor.
cling.
GB
309752
HWW 3500
230 V~, 50 Hz
1000 W
IPX4
► P. 4, fig. 2
42 m
8 m
3500 l/h
35 °C
2 bar
33

Werbung

loading

Diese Anleitung auch für:

309752