Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The device must be disconnected from the power supply if left unat-
tended and prior to assembly, disassembly or cleaning.
Please remember that the blades of the blade assembly are very
sharp:
- Never touch the blades with your bare hands in order to avoid
cuts.
- When washing manually, the water should be sufficiently clear
so that you can see the blade assembly easily to avoid injuries
caused by the very sharp blades.
- When emptying the blender jug, ensure not to touch the blades
of the blade assembly.
- When removing and inserting the blade assembly ensure not to
touch the blades.
The blade assembly continues to rotate after the device is switched
off. Wait until all parts have come to a standstill before unlocking
and opening the lid of the blender jug.
This device is not intended to be operated using an external timer
or a separate remote control system.
If the power cable of this device should become damaged, it must
be replaced by the manufacturer, the manufacturer's customer ser-
vice department or a similarly qualified specialist in order to avoid
any hazards.
Prior to the replacement of accessories or attachments which move
when in operation, the device must be switched off and disconnect-
ed from the mains power supply.
Make sure that no liquid overflows onto the device plug connec-
tion.
Remember that the surface of the heating element remains hot after
use.
The base unit, the power cable and the mains plug must not be im-
mersed in water or other liquids.
This device is equally intended for use in the home and in applica-
tions similar to the home, such as for example...
... in kitchens for staff in shops, offices and other commercial set-
tings;
... on agricultural properties;
12 GB
Werbung
