Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Fan speed button
6.
Lock button
7.
SWING
8
Digital Display
Power button
In the standby state, Touch this button to turn on, the operation indicator lights up and the
default fan speed is high, and the default humidity is 50%. In the power-on state, Touch
this button to turn off, the running indicator light goes off and the compressor stops
immediately, and then the fan shut down after 30 seconds delay.
Mode button
Auto mode - continuously drying mode cycle, press once to switch the mode from one to
another, the corresponding indicator lights up.
Long press the mode button to choose sleeping mode.
Automatic mode: when environmental humidity ≥ set humidity +3%, the fan starts
working and compressor starts working after 3 seconds.
When environmental humidity ≤ set humidity -3%, the compressor stops working and fan
stops working after 30 seconds' delay.
Touch ADJ "
" button button to adjust the humidity level from 30% to 80% in automatic
mode.
Both fan speed and humidity can be adjusted under auto mode.
Drying mode: The compressor keeps working without control by humidity; Fan speed can
be adjusted, but target humidity level can not.
Sleep Mode: Long press the mode key to select the sleep mode.
In sleeping mode, if no operation in 10 seconds, the power indicator and sleep indicator
turns dark gradually, and other indicators and digital screen are off.
Press any button will restored in normal display.
Other functions are the same as auto dehumidifying mode.
In sleeping mode, the fault code is not displayed, the wind speed and the humidity is
adjustable.
In sleeping mode, when the water tank is full , the machine will not alarm , but the water
tank full indicator light will be on to remind that the water tank is full and you need to empty
the water tank.
Timer button
Touch the timer button to set the 00-24 hour timing function. Display panel
"88 "flashes and will show timer hour, Touch ADJ"
the value displayed on the "88" display screen.
In the timing state: press the timing key, and the digital screen flashes to display the
remaining timing time. Press the timing key again to cancel the timing.
Long press this button to start the network configuration or disconnect the WIFI.
Touch this button to select fan speed between high and low.
Hold this button to turn child lock function on or off.
Press both TIMER and FAN button together to start Swing
function.
Displays humidity value, Timer setting or Temperature.
25/ 47
" button, the value increase 1 hour,
Werbung
