Pioneer CA-BC.025 Bedienungsanleitung Seite 5

Installation
Installation:
Mount the camera in a suitable position. Use suitable mounting material for this. If
necessary, lay the supplied extension cable from the camera to the monitor or end
device. Connect the camera plug to the system extension or the connection cable.
You can connect the camera connection cable either directly to the reversing light
or in the radio slot. To do this, use either the 3-metre connection cable of the system
extension or the connection cable in the radio slot. Insulate the ends of the unused
cables. Connect the red cable to the reversing light signal (+) and the black cable to
the vehicle earth (-). Connect the cinch plug ( RCA yellow ) to the reversing camera
input of the monitor or the terminal device.
Settings:
Disconnecting the jumper on the green cable
creates guide lines in the camera image.
5