Beurer BF 500 Super Black Edition Gebrauchsanweisung Seite 10

SAFETY NOTES ON HANDLING BATTERIES
• Always insert the batteries correctly, taking into account the po-
larity (+ / -). Keep batteries clean and dry and away from water.
Always select the correct battery type.
• Never short-circuit batteries and battery compartment contacts.
• Never charge, forcibly discharge, heat, disassemble, deform,
encapsulate or modify batteries.
• Never weld or solder on batteries.
• Never mix batteries of di erent manufacturers, capacities (new
and used), size and type within a device.
• Risk of explosion! Failure to comply with the points mentioned
above can result in personal injury, overheating, leakage, ven-
ting, breakage, explosion or fire.
• If a battery has leaked, put on protective gloves and clean the
battery compartment with a dry cloth.
• If your skin or eyes come into contact with battery fluid, rinse the
a ected areas with water and seek medical assistance.
• Choking hazard! Keep batteries out of the reach of children.
Seek medical attention immediately if swallowed.
• Never allow children to replace batteries without adult supervi-
sion.
• Store batteries away from metal objects in a well-ventilated, dry
and cool place.
• Never expose batteries to direct sunlight or rain.
• Remove batteries from the device if it is not going to be used for
a long period of time.
• Dispose of discharged batteries immediately and properly. Never
dispose of batteries in fire.
• When disposing of batteries, keep batteries with di erent elec-
trochemical systems separate.
3. INCLUDED IN DELIVERY
Check that the device packaging has not been tampered with and
make sure that all contents are present. Before use, ensure that the-
re is no visible damage to the device or accessories and that all pa-
ckaging material has been removed. If you have any doubts, do not
use the device and contact your retailer or the specified Customer
Services address.
• 1 diagnostic bathroom scale
• 3 AA 1.5 V batteries
• 1 set of instructions for use
• 1 quick guide
4. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
1 Display
2
Sensor button (reduces setting value)
3 SET sensor button (to confirm)
4
Sensor button
(increases setting value or for user selection when assigning
measured values)
5 Electrodes
6 Battery compartment
7 Measurements
8 Measurement unit
9 Body data
10 Measurement data transfer
11 Scale connected to Bluetooth
®
5. USAGE
5.1 Prerequisites for taking measurements
correctly
• Place the scale on a level and stable surface (see Figure A ).
• Wherever possible, weigh yourself at the same time every day
(ideally in the morning), after having been to the toilet, on an em-
pty stomach and without clothing.
• To determine your body fat, always stand barefoot on the elect-
rodes 5 on the scale.
• Stand upright and still throughout, from the weight measurement
through to the body fat measurement. Ensure that your weight
is evenly distributed.
5.2 Creating scale users in the "beurer Health-
Manager Pro" app
The scale has 8 memory spaces for di erent scale users, enabling
you to save the various members of your family, for example. You
can use the "beurer HealthManager Pro" app to conveniently set up
the individual app users and their corresponding scale user via your
smartphone. To do so, proceed as follows:
1. Scan the QR code with your smartphone and install the "beurer
HealthManager Pro" app.
Scan here to access the
"beurer HealthManager Pro" app
2. Launch the "beurer HealthManager Pro" app and follow the
instructions.
3. When you reach the end of the instructions, you will be promp-
ted to step onto the scale to take the initial measurement (for
subsequent automatic personal recognition if within +/- 3 kg). As
soon as a scale user (e.g. "U: 1") and "0.0" appears in the dis-
1
play , step onto the scale.
NOTE ON MULTI-USER USAGE:
Create a separate app user for each scale user (in the same or on
another smartphone/tablet with "beurer HealthManager Pro" app).
If the same scale is used by several app users, the device must be
added in the app for each of them during setup. A new user is auto-
matically created on the scale (e.g. U:2).
5.3 ALTERNATIVE METHOD: Creating scale users
without the app
Alternatively, you can create a scale user directly on the scale wit-
hout using the app. Do not create a scale user directly on the scale if
you have already created that scale user using the app. This process
is not required if the scale has already been connected to the app.
1. Remove the battery insulating strip from the battery compart-
ment 6 or insert batteries ("USE APP" flashes in display
2. Place the scale on a stable surface.
3. Press the SET button
4. Set the current date (year, month, day) and time. Confirm each
setting with the SET button
5. Press the SET button
6. "Unit" appears in display
and confirm with SET button
7. "USEr" appears in display
the scale user you need (you can select from U: 1 to 8). Confirm
the selection with SET button
10
3 .
3 until the display 1
3 .
1
, select with / button
3 .
1 . Use the button
3 .
1 ).
shows "0.0".
2 4
4 to select