Beurer BF 500 Super Black Edition Gebrauchsanweisung Seite 12

Diagnostic measurement cannot be taken (e.g.
measurement attempted while wearing shoes):
BF-- repeat the measurement barefoot.
Otherwise, only weight values will be displayed and
transferred.
The maximum weight capacity of 180 kg has been
oLd
exceeded: loads must not exceed 180 kg.
The batteries are flat: replace the batteries.
Lo
7.3 Bluetooth® connection problems
Problem Cause / Remedy
No Bluetooth Device is outside the Bluetooth
®
connection The minimum range in the open is
approx. 10 m. Walls and ceilings reduce
Symbol 11 is
the range. Other radio waves may inter-
not displayed
fere with the transmission. Therefore,
do not position the scale near devices
such as microwaves or induction hobs.
Ideally, switch o other Bluetooth
devices that are within range.
No Bluetooth
Measurements are No measurement for the scale user or
not sent no Bluetooth
The user memory (e.g. U: 1) which
Symbol 10 is not
appears on the scale display must be
displayed
assigned to the scale in your app set-
tings. Only these measurements can be
transferred. Therefore, check your user
on the scale when taking a measure-
ment and in your app settings.
8. DISPOSAL
For environmental reasons, do not dispose of the de-
vice in household waste at the end of its service life.
Dispose of the device at a suitable local collection
or recycling point in your country. Observe the local
regulations for material disposal. Dispose of the de-
vice in accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment).
If you have any questions, please contact the local
authorities responsible for waste disposal.
You can obtain the location of collection points for old devices from
the local or municipal authorities, local waste disposal company or
your retailer, for example.
connection to the app.
®
1. Switch on the scale to establish the
connection faster.
2. Switch Bluetooth on your smart-
®
phone o and on again. Ensure that
the scale is not being connected via
the Bluetooth settings of the oper-
®
ating system. If necessary, remove it
from the device list in the Bluetooth
settings and then use the "beurer
HealthManager Pro" app.
3. Completely close the app (includ-
ing in the background). Switch your
smartphone o and on again.
4. Briefly remove the batteries from
the scale and reinsert them. Launch
the app.
5. When connecting the scale, check
the status bar on the smartphone to
start pairing/bonding.
connection.
®
The empty, completely flat batteries must be disposed of through
specially designated collection boxes, recycling points or electro-
nics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful
substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
9. TECHNICAL SPECIFICATIONS
Model:
Dimensions:
range.
®
Weight:
Measurement range:
Display:
®
Repetition accuracy:
Absolute precision:
Battery:
Data transfer:
System requirements
®
and list of compatible
devices for the
"beurer HealthManager
Pro" app*
Subject to technical changes.
*This product satisfies the requirements of the applicable European
directives.
The CE mark has been applied in accordance with the following
European directives:
Directive 2014/53/EU (Radio Equipment Directive – RED)
The Declaration of Conformity for this product can be found at the
following address:
https://www.beurer.com/web/we-landingpages/de/cedeclaratio-
nofconformity.php
10. WARRANTY
Further information on the warranty and warranty conditions can be
found in the warranty leaflet supplied.
12
BF 500
300 x 300 x 28 mm
1700 g
180 kg / 396 lb / 28 st
kg: 0.1 kg / lb: 0.2 lb / st: between
0-19 st = 0.2 lb; between 20-28 st
= 1 lb
max. +/- 0.4 kg
max. +/- (0.5% +0.1 kg); e.g. for 80
kg: max. +/- 0.5 kg
3 x 1.5 V AA battery
low energy technology
®
Bluetooth
Frequency band: 2402 - 2480 MHz,
max. transmission power +3,1 dBm