bürkert 8623-2 Betriebsanleitung Seite 64

6.6 Configuration mode
In the configuration mode, the settings of the regulator can be adapted to the
current application. The regulation continues to run in the background with the
previously active parameters.
STANDARD
MODE
Fig. 13: Switching from the Standard mode to the Configuration mode
NOTE
Operating Instructions No. 803 052
Press key for 5 sec
Values that are changed in the Configuration mode will only
become active when this mode is exited in menu point END with the
key, or after the unit is switched off and on again..
CONFIGURATION
MODE
MEN
.
.
.
END
Press
key
63