Parkside PHSA 20-Li C3 Originalbetriebsanleitung Seite 33

• Dowels, if necessary
Attaching the wall bracket
WARNING! Personal injury or dam-
age to property during drilling. Use suit-
able detectors to determine if
there are hidden supply lines or
contact the local utility company
for assistance. Contact with electric
cables can cause fire and electric shock.
Damaging gas lines can lead to explo-
sion. Breaking water pipes causes prop-
erty damage.
• Using dowels, place one screw at the
desired position on a wall.
• Let the screw head protrude with ca.
10 mm mm distance to the wall.
• Make sure that the suspension system is
designed for the weight of the device.
• (Fig. C) You can place the device with
the keyhole (16) against the screw and
pull the device down as far as it will
go.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• On/Off switch (6)
• Switching on: Press and hold togeth-
er with the safety switch (4).
• Switching off: Release the on/off
switch (6) or the safety switch (4).
• Safety switch (4)
Ensures two-handed operation.
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
Meaning
Battery partially
charged
Battery needs to be
charged
1. Press the button (12) next to the
charge level indicator button (11) on
the battery (9).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
2. Charge the battery (9) when only the
red LED on the charge level indicator
(11) is illuminated.
Charging the battery
See also the charger instruction manual.
Notes
• If warm, allow the battery to cool be-
fore charging.
• Do not expose the battery to direct sun-
light for long periods and do not place
it on a radiator (max. 50°C).
Charging the battery
1. Remove the battery (9) from the
device.
2. Push the battery (9) into the charging
slot of the battery charger (13).
3. Connect the battery charger (13) to a
power outlet.
4. After charging, disconnect the battery
charger (13) from the mains.
5. Pull the battery (9) out of the battery
charger (13).
Control LEDs on the charger (13):
green red
lights up —
— lights up
— flashes
flashes flashes
GB MT
Meaning
• Battery is fully
charged
• stand-by (No
battery inserted)
Battery is charging
Battery is over-
heated
Battery is defective
33