Selve i-R Light Sensor Betriebsanleitung Seite 26

Transmitter programming procedure
EN
1.3) Deprogramming the i-R Light Sensor
P ress the PROG button on the receiver or a programmed trans-
mitter for 3 seconds (wait for confirmation: brief upwards and
downwards movement of the motor). The receiver remains
in programming mode for 1 minute. Briefly press (1 sec.) the
PROG button of the sensor. The sensor has now been
de p rogrammed.
Transmitter or
receiver
3 sec.
Sensor
➡
26
1 sec.
3