Logging Host Modify - Hirschmann HiOS-2S RSPE Referenzhandbuch

Logging

41.1.7 logging host modify

Modify an existing logging host.

Mode: Global Config Mode

Privilege Level: Administrator

Format: logging host modify <P-1> [addr <P-2> <P-3>]
[transport <P-4>] [port <P-5>] [severity <P-6>] [type
<P-7>]
[addr]: Enter the IP address of the server.
[transport]: Configure the type of transport used for syslog server trans-
mission.
[port]: Enter the port used for syslog server transmission.
[severity]: Configure the minimum severity level to be sent to this syslog
server.
[type]: Configure the type of log messages to be sent to the syslog server.
Parameter Value
1..8
P-1
P-2 string
a.b.c.d
P-3
udp
P-4
tls
1..65535
P-5
emergency
P-6
alert
critical
error
warning
notice
informational
debug
0
1
2
3
4
5
6
7
464
Meaning
Syslog server entry index
Hostname or IP address.
IP address.
The UDP-based transmission.
The TLS-based transmission.
Port number to be used
System is unusable. System failure has
occurred.
Action must be taken immediately. Unrecover-
able failure of a component. System failure
likely.
Recoverable failure of a component that may
lead to system failure.
Error conditions. Recoverable failure of a
component.
Minor failure, e.g. misconfiguration of a
component.
Normal but significant conditions.
Informational messages.
Debug-level messages.
Same as emergency
Same as alert
Same as critical
Same as error
Same as warning
Same as notice
Same as informational
Same as debug
41.1 logging
RM CLI HiOS-2S RSPE
Release 6.1 09/2016