Werbung
Address Conflict Detection (ACD)
2.1.4
address-conflict delay
The maximum detection delay time in milliseconds. Time gap between ARP
or NDP probes.
Mode: Global Config Mode
Privilege Level: Operator
Format: address-conflict delay <P-1>
Parameter Value
20..500
P-1
2.1.5
address-conflict release-delay
Delay in seconds to the next ARP or NDP probe cycle after an ip address
conflict was detected.
Mode: Global Config Mode
Privilege Level: Operator
Format: address-conflict release-delay <P-1>
Parameter Value
3..3600
P-1
2.1.6
address-conflict max-protection
Maximum number of frequent address protections.
Mode: Global Config Mode
Privilege Level: Operator
Format: address-conflict max-protection <P-1>
Parameter Value
0..100
P-1
96
Meaning
Time gap between consecutive ARP or NDP pro-
bes ([ms], default 200).
Meaning
Delay between consecutive probe cycles after
a conflict was detected ([sec], default 15).
Meaning
Maximum number of frequent address protec-
tions (default 1).
2.1 address-conflict
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Werbung
Kapitel
