Renkforce 1359969 Bedienungsanleitung Seite 44

Editing chasers
Adding a step:
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Push the button BLACKOUT (11), to deactivate the blackout mode and visually check the chaser scene.
• Select the desired chaser with the CHASE 1-6 buttons (12).
• Press the TAP DISPLAY button (10) to activate single step playback.
• Press the BANK buttons(9) until the step after which a step is to be added is displayed.
• Press the MIDI/REC button (5).
• Select the next scene to be inserted with the BANK (9) and SCENES buttons (2).
• Press the MIDI/REC button (5) again.
• Press and hold the PROGRAM/PAUSE button (3) to save the changed chaser.
Deleting a step:
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Push the button BLACKOUT (11), to deactivate the blackout mode and visually check the chaser scene.
• Select the desired chaser with the CHASE 1-6 buttons (12).
• Press the TAP DISPLAY button (10) to activate step display.
• Press the BANK buttons (9) until the step to be deleted is displayed.
• Press the AUTO/DEL button (7). The selected step was deleted.
• Press and hold the PROGRAM/PAUSE button (3) to save the changed chaser.
Deleting single chasers
• Press and hold the PROGRAM/PAUSE button (3) until the respective LED flashes.
• Select the chaser to be deleted with the CHASE 1-6 buttons (12).
• Push and hold the AUTO/DEL (7) button and push the CHASE 1-6 (12) button for the chaser to be deleted.
• Press and hold the PROGRAM/PAUSE button (3) to leave the programming mode again.
44