Denon DRM-710 Bedienungsanleitung Seite 8

| ENGLISH
REC/REC MUTE BUTTON
REC/REC MUTE is the DENON's unique and convenient
function. By using this button, it is easily possible to insert
a suitable space (the non-recorded part) between two
melodies.
1. When you want to make about 5 sec of non-recorded
part after the recording state:
Press the REC/REC MUTE button. The recorder will
automatically create about 5 sec of non-recorded part
and will stay in the recording standby state.
2. To create about 5 sec of non-recorded part after the
standby state:
MUSIC SEARCH SYSTEM
Press the REC/REC MUTE button, and the recorder will
enter the non-recording state, automatically create about
5 sec of non-recorded part and stay in the standby state.
3. To cancel the non-recording state (the REC MUTE state):
Press the PAUSE button, and the recorder will cancel the
non-recording state and will stay in the standby state.
4. To extend the non-recording state (the REC MUTE state)
for further 5 sec or more:
Press the REC/REC MUTE button, and the non-recorded
part will automatically be extended for another 5 sec.
This device is a convenient system which detects the
non-recorded part of more than 4 seconds between melodies,
cues the next melody while the present melody is being
reproduced or automatically detects the beginning of the
melody now being reproduced and makes it into the repro-
duceable state. |
1. For cueing the next melody while the present melody
is being reproduced :
At PLAY mode, depress the PLAY button and the FF
button simultaneously. This device will detect the
interval between melodies with the CUE state on, auto-
matically become the PLAY mode and begin performing
the next melody.
2. For hearing again the melody being reproduced:
At PLAY mode, depress the PLAY button and the REW
button simultaneously. This device will detect the
interval between melodies with the REVIEW state on,
automatically become the PLAY mode, detect the be-
ginning of the melody now being performed and play
it from the first again.
TAPE COUNTER AND MEMORY STOP
Note: Note about MUSIC SEARCH action :
MUSIC SEARCH is a function which operates by detecting
a comparatively long non-recorded part on the tape. There-
fore, MUSIC SEARCH may not operate normally in the
following cases.
e Sound on the tape is interrupted by speech or conversa-
tion.
eLong periods of pianissimo (softly played music) or
non-recorded intervals occur on the tape. |
e The tape has picked up noise in a non-recorded interval.
e Non-recorded intervals on the tape are less than 4 seconds
in length.
e Noise-emitting electrical appliances are in operation
nearby. i.e. ; Electric razors, drills, refrigerators, etc.
d -40 -30 -20 45 -0 -7 -5 -3 -2 -1 o + +3 45 48 +O
L DODO0ÓQO00000000000000000000000000
O rec
— E EI u
REMOTE SENSOR > — E,
R 00900000000000DD00000D0o0000000000 |
DO MEMORY MPX FILTER —— TAPE
D,
Dow
—— pe MUSIC SEARCH