Maintenance And Cleaning; Appendix - Futurelight Scan SC - 780 Bedienungsanleitung

Channel 8: Shutter, Strobe, Gobos
Channel 9: Dimmer, Conversion filters, Frost, 3-facet prism
Channel 10: Prism rotation
Channel 11: Rotating gobos
Channel 12: Gobo rotation, gobo indexing
Channel 13: Iris
Channel 14: Focus
Channel 15: Shutter, strobe
Channel 16: Dimmer
Housing
- Easy access to lamp and main components thanks to large opening cover and the projector's modular construction.
Dimensions:
L x W x H: 670 x 240 x 210 mm
Weight:
28kg
It is absolutely essential that the projector is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the projector. Otherwise, the projector's light-output will be significantly reduced. Regular cleaning
will not only ensure the maximum light-output, but will also allow the projector to function reliably throughout its
life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
The front mirror and objective lens will require weekly cleaning as smoke-fluid tends to building up residues,
reducing the light-output very quickly. The cooling-fan should be cleaned monthly.
The gobos may be cleaned with a soft brush. The interior of the projector should be cleaned at least annually using
a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should be cleaned monthly.
To ensure a proper function of the gobo-wheel, we recommend lubrication in six month intervals. The quantity of oil
must not be excessive in order to avoid that oil runs out when the gobo-wheel rotates.
We hope you will enjoy your SC-780. We can assure you that you will enjoy this device for years if you follow the
instructions given in this manual.
Should you have further questions, do not hesitate to contact your local dealer.
© 12/98

10. Maintenance and cleaning

DANGER !
Disconnect from the mains before starting any
maintenance work

11. Appendix

3 3