Cleaning And Maintenance - Futurelight FY-200 Bedienungsanleitung

Control channel 4 – Gobos, Reset, Strobe
DMX-value Feature
0-8 0 open
9-17 Gobo 1
18-26 Gobo 2
27-35 Gobo 3
36-44 Gobo 4
45-53 Gobo 5
54-62 Gobo 6
63-71 Gobo 7
72-80 Gobo 8
81-89 Gobo 9
90-98 Gobo 10
99-107 Gobo 11
108-116 Gobo 12
117-125 Gobo 13
126-187 Forwards gobo-change with increasing speed
188-249 Backwards gobo-change with increasing speed
250-255 Remote stand-alone music trig and auto trig
Control channel 5 – Reflector rotation
DMX-value Feature
0-15 No rotation
16-30 Mirrored cylinder and reflector music trig
31-45 All functions music trig
46-150 Clockwise rotation with increasing speed
151-255 Counterclockwise rotation with increasing speed
Control channel 6 – Strobe effect
DMX-value Feature
0-1 Shutter closed
2-129 Dimmer (closed-open)
130-189 Strobe effect with decreasing speed
190-199 Shutter closed
200-209 Random strobe effect
210-229 Stand-alone music trig and auto trig
230-239 Shutter closed
240-249 Reset (after 3-5 seconds)
250-255 Shutter open

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
31/63 51837535_V_1_0.DOC