Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications; Dimensions Of The Machine - Grillo PK 600 Wartungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not use the vehicle near to ditches or verges which could collapse under the weight of the machine, especially
when the surface is loose or wet.
Never tamper with or deactivate the safety devices.
Any misuse causes the warranty to become null and void and the constructor will decline any liability.
FURTHER SAFETY ADVICE
The above-mentioned warnings could not be enough to avoid all risks, if the operator does not use the transporter
correctly.
Therefore, for your safety we give you the following advice:
When downhill always swerve slowly.
Always drive slowly along uneven paths.
Do not perform any maintenance on the machine with the body raised without having put the safety strut on the
hydraulic cylinder.
Place well the evenly distributed load and fix it with suitable ropes or bands.
Do not transport loads projecting from the body, especially on roads.
Bulky loads make the machine lose stability. Pay special attention.

TECHNICAL SPECIFICATIONS

MODEL: wheeled transporter.
ENGINE: LOMBARDINI FOCS 1003 1028cc 25,5 HP (@ 3600 r.p.m.) diesel with 3 cylinders liquid-cooled engine
STARTING: electric 12V.
FUEL TANK: 23 litres.
GEARBOX: Continuously variable CVT with double speed range and reverse gear.
MAX SPEED (with 23x10.50-12 wheels): 35 km/h.
WHEELS: Tractor tyres 23x10.50-12 (8 PR).
DRIVE: four driving wheels.
DIFFERENTIAL: on the two axles with lock device on the rear axle.
FRONT AXLE: steering
REAR AXLE: steering and disconnectable
STEERING: hydraulic.
TURNING RADIUS: 180 cm
STEERING SYSTEM: hydraulic
SEATS: sprung and adjustable.
SERVICE BRAKE: 4 hydraulic disc brakes, acting on the four wheels.
EMERGENCY AND PARKING BRAKE: mechanic band brake acting on the transmission.
LOAD BED: three-way hydraulic tipper 1770 x 1470 x 300 mm
HEIGHT OF THE BODY LOADING PLATFORM FROM THE GROUND: 850 mm.
DRIVER'S PROTECTING GRILL: fitted on the front side of the load bed.
LOADING CAPACITY: max. 900 kg (with 2 people on board).

DIMENSIONS OF THE MACHINE:

Length 3460 mm;
Width 1600 mm;
Height 2030 mm;
Distance between axles 1705 mm;
Wheel track 1350 mm.
Weight: 1150 kg.
Implements: heater-kit, vehicle doors, TURF wheels 23x10.50-12
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis