Identification And Servicing; Technical Specifications - Grillo FD 220R Bedienungsanleitung

AFTER-SALES SERVICE
This handbook provides the instructions for using the mower. For correct servicing, contact your local dealer.
SPARE PARTS
Original spare parts should always be used, as they are the only guarantee of safety and interchangeability.
Always state both the machine's serial number and the number of the required spare parts. For engine parts,
follow the instructions provided in the specific manual.
WARRANTY
The guarantee is given in compliance with the current law. The dealer will have to give the client a copy of the
registration card of the machine, which they will print up from the Grillo website. For the engine the guarantee
of the relative manufacturers apply.
RECOMMENDED SPARE PARTS TO BE KEPT TO HAND
1 set of blades
1 set of belts
1 engine air filter
1 engine oil filter
1 throttle cable
2 fuses
HOW TO ORDER SPARE PARTS
Always state the machine's serial number and the number of the required spare parts. Contact your local Grillo
service centre. For further information:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC)
Tel. 0547 633111 - Fax 0547 632011
Web site: www.grillospa.it / e-mail: grillo@grillospa.it
- B&S VANGUARD OHV 14 HP, 479 cm³ twin-cylinder petrol engine synchro-balanced.
- B&S INTEK 3130 OHV 10 HP, 344 cm³ single-cylinder petrol engine synchro-balanced (AVS).
STARTER: electric with 12 V battery.
FUEL TANK: 7 litres – EMERGENCY SUPPLY: 1 litre.
GEARBOX: hydrostatic transmission with differential.
SPEED: 0 – 9 km/h continuously variable and pedal-operated.
CLUTCH: electromagnetic for PTO, with magnetic blade brake.
DRIVING SYSTEM: steering wheel and forward and reverse speeds engaged through pedal.
SEAT: adjustable through knob and mounted on shock-absorbers.
FD220R/ Translation of the original instructions

IDENTIFICATION AND SERVICING

TECHNICAL SPECIFICATIONS

8
IDENTIFICATION
The Grillo FD220R has an ID-plate showing the
serial number, located underneath the seat.