Parkside PAP 20 B1 Originalbetriebsanleitung Seite 34

GB MT
tiles). Risk of fire due
to heating caused by
charging.
If the power cord of
•
this device is dam-
aged, it must be re-
placed by the manu-
facturer, their custom-
er service or by a sim-
ilarly qualified person
in order to avoid haz-
ards. contact the ser-
vice centre.
Pull the mains plug
•
when the battery is
fully charged and dis-
connect the battery
from the charger.
Do not use the char-
•
ger to charge non-re-
chargeable batteries.
Preparation
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
34
Information on the
batteries
• Switch off the device and remove the
battery from the device before carry-
ing out any work.
• The rechargeable battery only
reaches its full capacity once it has
been charged several times.
• Charge the battery before using it for
the first time.
Checking the battery
charge level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (2) next to the
charge level indicator button (3) on
the battery (4).
The LEDs of the charge level indicator
show how much charge remains in
the battery.
2. Charge the battery (4) when only the
red LED on the charge level indicator
(3) is illuminated.
Inserting and removing
the battery
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and bat-
tery.
Meaning
Battery partially
charged
Battery needs to be
charged