Rotel Adagio Bedienungsanleitung Seite 23

310032 rotel_adagio U2732_U2733_inhalt.qxp:Rotel_Adagio277_Content
Please note: If you are preparing a cup of coffee for the first time, the milling chamber
will still be empty. It is possible that the
after the first milling process and that the coffee machine will not make any coffee. In
this case, just push the selection knob (4) once more, to repeat the brewing process.
TIP: To help you find out how much water is ideal to match your taste or the size of
your coffee cup, do the following when making your first cup of coffee:
• Turn the water amount adjustment knob (2) to the following positions:
– for a cup of espresso, to the middle of the point scale
– for a large cup of coffee, all the way to the right
• Press the 1 cup selection knob (4)
• The coffee machine will now start the brewing process.
• Just before the coffee cup is filled to the desired amount, turn the water amount
adjustment knob (2) slowly to the left until the machine stops brewing.
• Note for future brewing processes the position of the water amount adjustment
knob (2) on the point scale.
3.4 Brewing two cups of coffee
Two millings are automatically done one after another for 2 cups operation.
• Place both cups under the coffee outlet (9).
• Select the desired coffee strength and water quantity for one cup.
• Press the 2 cups selection button (5).
• The coffee machine now begins brewing and makes 2 cups of coffee one after
another.
You may interrupt the process at any time by pushing any button.
If it happens that the water or coffee beans run out right between two millings
or the train must be emptied, it will be indicated an the second cup of coffee
will not be made. Follow the instructions for that symbol and afterwards press
only the 1 cup selection knob (4) for the second cup of coffee.
3.5 Brewing with pre-ground coffee
• First set the water amount adjustment knob (2) for the amount of water desired for
one cup of coffee.
• Open the cover to the well for coffee grounds (17). The symbol
• Fill one level spoonful of ground coffee using the measuring spoon for ground cof-
fee (19) and close the cover. The symbol
• Place your cup under the coffee outlet (9) and press the selection button for 1 cup (4).
If the powder well is opened by accident, or if a brewing button is not pushed
after the grounds have been filled, the rinsing button (6) starts to blink one
minute after the cover was reclosed. Press the rinsing button (6), the machine
is then rinsed via the coffee outlet (9) and is once more ready for service.
Please note: The ground coffee well is not for storage. Therefore you should never
place more than one portion in the well and always use fresh or vacuum-packed
grounds from milled beans. Instant coffee may not be used.
symbol for no coffee beans could blink
will light up constantly.
17.1.2011 14:09 Uhr
begins to blink.
27
Sei