56
www.aeg.com
1.1 Care and cleaning
Door:
To remove all trace of dirt, regularly clean both sides of
the door, the door seals and sealing surfaces with a soft,
damp cloth. Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass since they
can scratch the surface, which may result in shattering of
the glass.
Oven interior:
For cleaning, wipe any splatters or spills with a soft
damp cloth or sponge after each use while the oven is
still warm. For heavier spills, use a mild soap and wipe
several times with a damp cloth until all residues are
removed. Do not remove the waveguide cover. Make
sure that mild soap or water does not penetrate the small
vents in the walls which may cause damage to the oven.
Do not use spray type cleaners on the oven interior.
Clean the waveguide cover, the oven cavity, the turntable
and turntable support after use. These must be dry and
free from grease. Built-up grease may overheat and begin
to smoke or catch fire.
Oven exterior:
The outside of your oven can be cleaned easily with mild
soap and water. Make sure the soap is wiped off with a
moist cloth, and dry the exterior with a soft towel.
Control panel:
Open the door before cleaning to de-activate the control
panel. Care should be taken when cleaning the control
panel. Using a cloth dampened with water only, gently
wipe the panel until it becomes clean. Avoid using
excessive amounts of water. Do not use any sort of
chemical or abrasive cleaner.